Author Topic: Falcon Player - What Do I Need To Get Started?  (Read 19346 times)

Offline MyKroFt

  • Administrator
  • *****
  • Join Date: Mar 2013
  • Location: NC Montana
  • Posts: 1,389
  • Kudos: 54
Falcon Player - What Do I Need To Get Started?
« on: September 03, 2013, 04:21:28 PM »
The following information will get you started and list what you need to purchase/download.

Basic System Requirements:
  • Raspberry Pi
    • Raspberry Pi Model A, A+, B, B+, or v2 B Project Board (v2 B preferred)
    • At least a 8GB Class 4 or higher SD Card (micro-SD needed for B+ and v2 B)
    • At least a 4GB or higher USB Flash Drive
    • 5V 1A or higher Micro USB Power Supply (2A preferred)
  • BeagleBone Black
    • BeagleBone Black Rev C Project Board
    • At least a 8GB Class 4 or higher micro-SD Card
    • At least a 4GB or higher USB Flash Drive (if not running OS/FPP off internal eMMC memory on BBB)
    • 5V 1A or higher (2A preferred) Mini "USB B" Power Supply OR power supply with "USB type A" connector

With just the above items, your PI or BBB will be able to send out E.131 without any additional requirements.  You will still need hardware to receive E.131 at the other end and that is beyond this post.

Optional Items:

« Last Edit: January 11, 2016, 02:19:09 PM by CaptainMurdoch »

 

Back to top