Author Topic: pi  (Read 1453 times)

Offline derylreed

  • Newbie
  • *
  • Join Date: Jan 2015
  • Location:
  • Posts: 1
  • Kudos: 0
pi
« on: January 03, 2015, 07:19:38 PM »
just ordered a raspberry pi to run my lightshow using 1 lightorama board one d light board and 2 san device e682 what do I have to do new to this setup
« Last Edit: January 03, 2015, 07:26:42 PM by derylreed »

Offline CaptainMurdoch

  • Administrator
  • *****
  • Join Date: Sep 2013
  • Location: Washington
  • Posts: 9,020
  • Kudos: 178
Re: pi
« Reply #1 on: January 04, 2015, 07:57:06 PM »
Check out some of the sticky posts in the Falcon Player forum to see what you'll need to get FPP installed.  There are also links to videos to get you introduced to the player.  You'll need a USB serial dongle to connect to your equipment using the LOR protocol if you don't have one already.  The Falcon Player forum is probably the best place to search and ask questions.  There are quite a few users using LOR already and lots using E1.31 with various controllers or bridges.
-
Chris

 

Back to top