I'll be doing some testing this weekend but it's suppose to warm back up to 30 or so before it dips back down next week into the single digits. The PS is in the same case which is a marine battery box so it has vents on the side of the lid. In the fall for Halloween it gets quite warm but. It much heat from what I could feel. I use an old HP DL380 G5 power supply to power the board. I'll pick up a c9 and see if that makes a difference. This is the first time it's been this cold on us in December (I can't recall it being colder over the last four years since running a show) so I don't have much field testing in these conditions. I'll report back on the c9 approach - but does sound promising.
Sent from my iPhone using Tapatalk