Also, what is the reason to have a Pi just connected to the transmitter? and no controller? Referring to the diagrams on the 1st page
My master has only the FM transmitter on it, because it is inside the house and is a Bplus while all the Pis attached to controllers are Pi3s. There have been lot of issues with Pi3 and audio so I repurposed my Bplus unit. Plus I keep the transmitter inside the house and have no wires going from inside to outside. It also is right next to my wifi show router. All 3 items are mounted to a piece of pegboard on a wall inside a closet on the front side of the house.
Wifi show router? Can you explain that setup? Sorry for so many ?'s, just trying to understand all this stuff.
Some people setup a dedicated WiFi network for their show separate from their home WiFi network. If you are use sending FPP sync packets there is not an issue. If you are sending actual E1.31 packets they are rather noisy and will flood your WiFi network and make it tough to do things like surf the net. By having the E1.31 on its own WiFI you don't impact your home network.
Sent from my iPad using Tapatalk Pro