Author Topic: FPP driving P10 panels over Ethernet via a $30 ColorLight 5a-75B receiver board  (Read 16712 times)

Offline n19bmw

  • Newbie
  • *
  • Join Date: Feb 2018
  • Location: Beverly, NJ
  • Posts: 3
  • Kudos: 0
Where are people getting their P5 panels?



Pat
Just ordered a couple for testing from aliexpress. Can't find the link but here's the description.

LYSONLED Indoor SMD2121 RGB 1/16 Scan P5 LED Module 320x160mm 64x32 Pixels, Hd LED Video Wall RGB P5 LED Display Panel 32x16cm

Sent from my SM-G955U using Tapatalk


Offline patdelaney

  • Administrator
  • *****
  • Join Date: Jun 2014
  • Location: Madison, WI
  • Posts: 1,064
  • Kudos: 8
thanks

Offline k6ccc

  • Jr. Member
  • **
  • Join Date: Mar 2015
  • Location: Glendora, Calif, U.S.A. (near Los Angeles)
  • Posts: 89
  • Kudos: 0
    • Newburgh Lights
Where are people getting their P5 panels?

Pat,  Mine are Pre-sale ordered from Crockett Fantasy of Lights
https://www.crockettfantasyoflights.com/product/pre-sale-p5-matrix-panels/
Jim

Offline gadgetsmith

  • Hero Member
  • *****
  • Join Date: Apr 2014
  • Location: Charlton, NY
  • Posts: 930
  • Kudos: 14
Bought 40 from Aliexpress last month.

https://m.aliexpress.com/item/32816779423.html


Offline Cjaqua

  • Newbie
  • *
  • Join Date: Nov 2015
  • Location:
  • Posts: 41
  • Kudos: 1
Bought 40 from Aliexpress last month.
https://m.aliexpress.com/item/32816779423.html
How are they working for you? Any issues with trailing/ghosting particularly when using the Xlights snowflake effect (white snowflakes) in a dark room? Do you know what refresh rate you are running them at?

Offline gadgetsmith

  • Hero Member
  • *****
  • Join Date: Apr 2014
  • Location: Charlton, NY
  • Posts: 930
  • Kudos: 14
I've only tested the rainbow effect. I'm working on getting two 8x1 panels setup to test more.

Offline n19bmw

  • Newbie
  • *
  • Join Date: Feb 2018
  • Location: Beverly, NJ
  • Posts: 3
  • Kudos: 0
The FPP Master branch now supports outputting to the ColorLight and Linsn. I have confirmed that with the group here. However; the write up for the ColorLight  ( I have both, I have just made more progress with the ColorLight) is still in the works. If you have a color light would be happy to walk through it with you on a team viewer.
Bshaver do you have the linsn setup document? Would you mind sharing if so. Thanks

Sent from my SM-G955U using Tapatalk


Online arw01

  • Hero Member
  • *****
  • Join Date: Oct 2013
  • Location:
  • Posts: 873
  • Kudos: 0
Is there a video yet of getting going from scratch with the Colorlight 5a card?  Not even sure mine came with the software, almost to this project to start figuring it out and getting it going.

Offline brichi

  • Full Member
  • ***
  • Join Date: Dec 2017
  • Location:
  • Posts: 161
  • Kudos: 0
I had to give up on the 5A, I cant do 9 rows of panels with it :(

Offline Unibits

  • Falcon Beta Team
  • **
  • Join Date: Apr 2013
  • Location:
  • Posts: 85
  • Kudos: 2
You can gang up the cards to make your matrix as big as it needs to be.  If you do your original configuration with the color light software then transfer the settings into the bbb it will work. I tried 2 linsn cards and it worked here. 


Sent from my iPhone using Tapatalk

Offline brichi

  • Full Member
  • ***
  • Join Date: Dec 2017
  • Location:
  • Posts: 161
  • Kudos: 0
thanks for the info, I figured I could add another card or get a "E" card which I believe has 12 outputs but at that point I can probably just stick with the Octoscroller that already can handle it all with 1

 

Back to top