Author Topic: Playback from Vixen  (Read 80 times)

Offline bgedney

  • Newbie
  • *
  • Join Date: Dec 2017
  • Location:
  • Posts: 1
  • Kudos: 0
Playback from Vixen
« on: December 06, 2017, 09:44:35 AM »
So, I feel like I'm missing something - I have an F16v3 and I'm trying to playback from Vixen for the moment. I have FPP but the PI isn't booting right (I'm running it headless [no KVM attached, thinking that might be it] but my plan was to test/run with Vixen till I'm able to get a moment to get FPP working.


In Vixen, I've patched the outputs to the a Streaming ACN controller that I've set Unicast to my Falcon F16v3, the Controller's E1.11 Packets Received is incrementing as I'd expect it to, the String Ports appear to be mapped correctly (I'm only testing with 100 pixels, so thats only going to be 1 universe)- but there is zero output on the lights...


The lights will light up when in test mode. 


Is there something I'm missing?


Bill

Offline BigAlsTwinkle

  • Newbie
  • *
  • Join Date: Jun 2015
  • Location: Rogers, AR
  • Posts: 11
  • Kudos: 0
Re: Playback from Vixen
« Reply #1 on: December 06, 2017, 12:09:51 PM »
In vixen is your controller "falcon1" "on"?

Offline pixelpuppy

  • Hero Member
  • *****
  • Join Date: Aug 2015
  • Location: Dallas, TX
  • Posts: 560
  • Kudos: 10
Re: Playback from Vixen
« Reply #2 on: December 06, 2017, 02:52:07 PM »
Probably unrelated, but couldn't help notice.  Why are you running the pixels at 14 volts?  (according to the F16V3 status screen)
Vixen and xLights for sequencing / FPP for scheduling and playing / Falcon controllers for pixels / DIY controllers for everything else

 

Back to top