Author Topic: Control Laser Lights  (Read 79 times)

Offline corydorning

  • Full Member
  • ***
  • Join Date: Nov 2016
  • Location:
  • Posts: 103
  • Kudos: 0
Control Laser Lights
« on: December 07, 2017, 12:57:29 PM »
I have the F16v2 and was wondering how I could go about controlling one of the laser lights from https://www.laserchristmaslights.com. Really just to switch power to it on or off so it just automatically runs with my show (setup via XLights).


Any insight is appreciated.

Offline corydorning

  • Full Member
  • ***
  • Join Date: Nov 2016
  • Location:
  • Posts: 103
  • Kudos: 0
Re: Control Laser Lights
« Reply #1 on: December 07, 2017, 12:58:31 PM »
I'm using FPP as well, if relevant.

Offline Bshaver

  • Developer
  • ******
  • Join Date: Aug 2014
  • Location: Denver, CO
  • Posts: 1,325
  • Kudos: 22
Re: Control Laser Lights
« Reply #2 on: December 07, 2017, 02:51:04 PM »
AC Control. You can get a DMX controlled relay that you program into your sequence and turn the channel on and it will turn on the AC power inline. Or you can get 16 port Lynx Express that is completely AC, and control it. And have 15 extra ports for regular AC lights.


I have a few extra LYNX if you are interested and want to get into controlling AC items with your sequence.


We run all FPP here, some pixels but mostly AC lights. 130 channels of AC.

Offline corydorning

  • Full Member
  • ***
  • Join Date: Nov 2016
  • Location:
  • Posts: 103
  • Kudos: 0
Re: Control Laser Lights
« Reply #3 on: December 08, 2017, 09:01:07 AM »
i run all pixels so i really only have the need to control a single laser light. not familiar with the dmx controlled relay stuff. can you point me in the right direction?

 

Back to top