« previous next »
Pages: [1]   Go Down

Author Topic: FPP and PI3 keeps changing the output port...Please help  (Read 561 times)

Offline BillW

  • Newbie
  • *
  • Join Date: Feb 2015
  • Location:
  • Posts: 3
  • Kudos: 0
FPP and PI3 keeps changing the output port...Please help
« on: December 22, 2017, 02:52:16 PM »
My PI3 keeps changing the output port from ttyUSB to ttyamao, why? I stop and restart the FPPD as directed but it goes back to TTYAMAO. I have unplugged everything, changed USB cables, rebooted the pi, but I'm still not able to keep the setting, please help!

Bill
Logged

Offline JonB256

  • Supporting Member
  • ******
  • Join Date: Mar 2013
  • Location: Granbury, Texas
  • Posts: 4,263
  • Kudos: 89
    • Granbury Christmas Lights
Re: FPP and PI3 keeps changing the output port...Please help
« Reply #1 on: December 22, 2017, 03:16:23 PM »
What do you have plugged into the port? Is it perhaps "slow" to be recognized during the scan?
Logged

Offline BillW

  • Newbie
  • *
  • Join Date: Feb 2015
  • Location:
  • Posts: 3
  • Kudos: 0
Re: FPP and PI3 keeps changing the output port...Please help
« Reply #2 on: December 22, 2017, 04:15:44 PM »
Only a thumb drive and USB cable for the controllers. Also I forgot to add, when I save the settings it reverts back to TTYAMAO.
Logged

Offline CaptainMurdoch

  • Administrator
  • *****
  • Join Date: Sep 2013
  • Location: Washington
  • Posts: 9,014
  • Kudos: 178
Re: FPP and PI3 keeps changing the output port...Please help
« Reply #3 on: December 22, 2017, 04:57:34 PM »
Go to the FPP Troubleshooting Commands page and scroll down until you find the 'lsusb' section and see if you see your USB device listed.
Logged
-
Chris
Pages: [1]   Go Up
« previous next »
 

Back to top