Running DIY Matrices Built with Strings/Strips

Author Topic: Running DIY Matrices Built with Strings/Strips  (Read 609 times)

Offline Todd

  • Full Member
  • ***
  • Join Date: Jan 2017
  • Location: Kimberly, Wisconsin
  • Posts: 141
  • Kudos: 3
Re: Running DIY Matrices Built with Strings/Strips
« Reply #15 on: May 14, 2018, 12:16:18 PM »
It's a little more money for the pixels, but my thinking is.... I only want to build this once. I don't want to have it all up and stand back only to realize then I should have spent a couple extra dollars. I don't like to waste money unnecessarily but to me a couple hundred bucks extra is worth it to have it look good.


Sent from my iPhone using Tapatalk
Todd L.
Kimberly, WI

Falcon F16V3 F48, FPP, X-Lights, LOR, Pi 3B

Offline earsofvaal

  • Newbie
  • *
  • Join Date: Apr 2018
  • Location: Winter Garden, FL
  • Posts: 11
  • Kudos: 0
Re: Running DIY Matrices Built with Strings/Strips
« Reply #16 on: May 14, 2018, 12:23:06 PM »
It's a little more money for the pixels, but my thinking is.... I only want to build this once. I don't want to have it all up and stand back only to realize then I should have spent a couple extra dollars. I don't like to waste money unnecessarily but to me a couple hundred bucks extra is worth it to have it look good.


Sent from my iPhone using Tapatalk
You're right. Coincidentally I am placing a large order with Ray today...


Sent from my iPhone using Tapatalk

Offline Emuney18

  • Sr. Member
  • ****
  • Join Date: Nov 2015
  • Location: Apex, NC
  • Posts: 418
  • Kudos: 4
Re: Running DIY Matrices Built with Strings/Strips
« Reply #17 on: May 14, 2018, 07:07:41 PM »
I did 4" spacing on my outlines with Rays C9 nodes which are basically a 12mm node with a small C9 cover that is actually closer to a real C7. 4" looks good and was not too close.  My house is 35-40' from the road. In this picture all the outlines of the windows, garage and roof are C9 at 4". The mega tree is 2".



Sent from my iPhone using Tapatalk

Offline earsofvaal

  • Newbie
  • *
  • Join Date: Apr 2018
  • Location: Winter Garden, FL
  • Posts: 11
  • Kudos: 0
Re: Running DIY Matrices Built with Strings/Strips
« Reply #18 on: May 14, 2018, 10:33:54 PM »
I did 4" spacing on my outlines with Rays C9 nodes which are basically a 12mm node with a small C9 cover that is actually closer to a real C7. 4" looks good and was not too close.  My house is 35-40' from the road. In this picture all the outlines of the windows, garage and roof are C9 at 4". The mega tree is 2".



Sent from my iPhone using Tapatalk
Nice! Love the icicles...


Sent from my iPhone using Tapatalk

 

Back to top