Author Topic: Set up In It's Most Basic Form  (Read 372 times)

Offline jonnyci

  • Newbie
  • *
  • Join Date: Jan 2014
  • Location:
  • Posts: 15
  • Kudos: 0
Set up In It's Most Basic Form
« on: August 24, 2018, 10:42:03 AM »
Based on the attached picture of my intended set up, does anyone see issues with the layout of my hardware?  Please keep in mind that this is in its most basic form and does not account for power supplies, pixels, props, etc.

Thanks appreciate any feedback

Jon

Offline k6ccc

  • Sr. Member
  • ****
  • Join Date: Mar 2015
  • Location: Glendora, Calif, U.S.A. (near Los Angeles)
  • Posts: 325
  • Kudos: 3
    • Newburgh Lights
Re: Set up In It's Most Basic Form
« Reply #1 on: August 24, 2018, 05:19:24 PM »
In very general terms, yes, it looks fine.
Using LOR (mostly SuperStar) for all sequencing - using FPP only to drive P5 and P10 panels.
Jim

Offline algerdes

  • Supporting Member
  • ******
  • Join Date: Apr 2014
  • Location: Lebanon, Illinois
  • Posts: 742
  • Kudos: 10
Re: Set up In It's Most Basic Form
« Reply #2 on: August 24, 2018, 10:06:56 PM »
The links are just fine, from my point of view.
Was wondering why you don't take the signal directly from the switch to the lower controller, instead of daisy chaining from the V3.
Sequencers: Vixen3 and xLights
Players: FPP and xSchedule Controllers:  Renards - SS24/SS16; E1.31 - San Devices E682 - Falcon F16, F4, F48 - J1Sys - DIYLEDExpress E1.31 Bridges.  Much more!

Offline jonnyci

  • Newbie
  • *
  • Join Date: Jan 2014
  • Location:
  • Posts: 15
  • Kudos: 0
Re: Set up In It's Most Basic Form
« Reply #3 on: August 27, 2018, 09:46:14 AM »

Thanks for the feedback.

algerdes -  there was no specific reason I diagramed it this way, just the way I thought the F48 had to be set up.

Thanks!

 

Back to top