Recent Posts

Pages: [1] 2 3 ... 10
1
Falcon Player (FPP) / Re: Master/Remote Network question
« Last post by jnealand on Today at 10:12:32 AM »
Normally the DHCP and Wifi are different networks.  Your computer has to be configured to access each network.  ie.  My laptop wifi always gets its address from the home network unless I change the wifi to the show network.  But my master has etho connected to the show network and the wifi to the home network.  The router on the show network connects via wifi to the remotes.  No need for the master to have wifi to the show network.  So it all depends on how you have setup your connections.
2
Falcon Player (FPP) / Master/Remote Network question
« Last post by Poporacer on Today at 10:06:38 AM »
I have a Master/Remote PI setup and on the  Master, I have the wlan0 set up Static and the eth0 as DCHP. I can access the web portal via the eth0 IP address but not by the wlan0 IP address. Is this by design?
3
Falcon Player (FPP) / Re: Random lockups in playlist
« Last post by brichi on Today at 09:19:08 AM »
I planned on running everything through audacity to see if it would help.
But I thought I would mention the problem and Supply the logs to see if it would help them make it a little more stable.
All the mp3s that I'm having problems with ran smoothly last year.


yeah, definitely a difference between 1 and 2, im sure they will work it all out
4
Falcon Player (FPP) / Re: Random lockups in playlist
« Last post by Ebuechner on Today at 08:57:13 AM »
I planned on running everything through audacity to see if it would help.
But I thought I would mention the problem and Supply the logs to see if it would help them make it a little more stable.
All the mp3s that I'm having problems with ran smoothly last year.
5
Thanks Al, that's good to know in advance.


Luckily I have a reel of decent 2-core wire handy.


David
6
Falcon Player (FPP) / Re: Random lockups in playlist
« Last post by brichi on Today at 08:20:01 AM »
Testing my Halloween show with 2.x and I'm having the fpp lock up randomly.
When I look at the fppd log I see, estimating duration from bitrate, this may be inaccurate. Header missing.
These are the same MP3 files that I used last year running my show in 1.x.


Hey Ed, I was getting a lot of MP# errors also, im still getting a few like I posted below but what helped me in the long run was dropping the MP3's into Audacity and exporting them using LAME mp3 at 192CBR, Not sure what your files are now but mine is running pretty smooth now after converting


warnings I still get:



 [mp3 @ 0x7b4260] Could not update timestamps for skipped samples.


2018-08-19 09:38:33 (1496) mediaoutput/SDLOut.cpp:641:"FROSTY THE SNOWMAN.mp3" - [mp3 @ 0x7b4260] Could not update timestamps for discarded samples
7
Falcon Player (FPP) / Random lockups in playlist
« Last post by Ebuechner on Today at 07:21:03 AM »
Testing my Halloween show with 2.x and I'm having the fpp lock up randomly.
When I look at the fppd log I see, estimating duration from bitrate, this may be inaccurate. Header missing.
These are the same MP3 files that I used last year running my show in 1.x.
8
No it won't work. You need to have a gnd connection between the pixel source (F16) and the power supply and pixels. Without the gnd there is no reference voltage for the data. All that's missing from the diagram is that gnd connection.
9
Hi all,


I've decided to ditch my Arduino-driven props in favour (favor) of Pi & F16V3.


I just wanted to make sure my thought process is sound with regards to powering items away from the F16 location.


Ignoring scale and extra injection requirements etc, will the attached basic wiring concept work? Just need to get this part clear in my head!


Thanks in advance,


David
10
F16V3 Pixel Controller / F16V3 Standalone testing.
« Last post by David Pitts on August 18, 2018, 04:43:08 PM »
If you have an audio board and F16V3 give me a call. Number is on http://pixelcontroller.com at bottom of the page.

David
Pages: [1] 2 3 ... 10
Back to top