Author Topic: Last LOR Controller Flashing With F16V3 DMX  (Read 129 times)

Offline PvtJoker

  • Newbie
  • *
  • Join Date: Apr 2017
  • Location: Dallas Tx
  • Posts: 25
  • Kudos: 0
Last LOR Controller Flashing With F16V3 DMX
« on: November 25, 2018, 06:46:58 PM »
I had posted a couple days ago about not being able to get the 5 LOR controllers in my show to even work on the F16V3 DMX Serial ports and had to fall back on last years Bridge. At first we thought it was that I was running the controllers out of order (4 & 5 were out of order) but now they are in order. I then linked them all together in order but once I would try and link controller 4 to 5 [/size]the lights would stop working on 3 & 4 and 5 did not work at all  but if I unplugged the RJ45 from LOR 5 controllers 1 thru 4 would work just fine. When they all plugged I get a solid green light on the controllers.but like I said only 1 & 2 work unless I unplug 5 then 1 thru 4 work [/size]T[/size]his is all while they were on Serial Output # 2  I then went in and changed the Serial Output #3 to Universe 50 as well and ran a CAT5 from DMX #3 to LOR controller #5 and now all controller 5 does is is flicker on and off out of sync[size=78%]. [/size][/font][/size]I have checked all the network cables all are good with green lights.[size=78%]


Same results testing in Xlights or with the FPP



Thank you for any help in advance

 

Back to top