Author Topic: 24 x 48 Matrix on Falcon V3 / Xlights setup question  (Read 199 times)

Offline Grave9

  • Newbie
  • *
  • Join Date: Nov 2017
  • Location:
  • Posts: 2
  • Kudos: 0
24 x 48 Matrix on Falcon V3 / Xlights setup question
« on: November 29, 2018, 02:29:47 PM »
Favor to you pro's out there. Been working in Xlights for the past 3 years and either I'm losing my mind OR I'm just burt out from thinking too much. Could some post their settings for a 24 x 48 pixel matrix? Here is what I have going:


Newest version on Xlights
2 - 24 x 48 matrix
Falcon v3 controller
2 - 4-String Differential Receiver Board - One for each matrix


If you have one of these and don't mind posting your controller settings, Xlight settings and model setup, I WILL OWE YOU. Thanks in Advance!...........Drew in AZ with sad face

Offline Emuney18

  • Hero Member
  • *****
  • Join Date: Nov 2015
  • Location: Apex, NC
  • Posts: 549
  • Kudos: 7
Re: 24 x 48 Matrix on Falcon V3 / Xlights setup question
« Reply #1 on: November 30, 2018, 02:29:09 PM »
Based on what you wrote it's hard to tell where or what your problem is.  You should login in to the xlights zoom and someone will fix your confusion very quickly.


Sent from my iPhone using Tapatalk

Offline jeff.ott

  • Newbie
  • *
  • Join Date: Dec 2017
  • Location:
  • Posts: 22
  • Kudos: 0
Re: 24 x 48 Matrix on Falcon V3 / Xlights setup question
« Reply #2 on: December 10, 2018, 10:16:18 PM »
Hope it's not too late. this is from a reply you made to my post on Matrix configuration. As I said I had to fool the controller to understand how I wired the pixels in the model. I have included images of my Falcon controller ports, xlights setup and xLights model for the matrix. Hopefull between my post and the images you can see how I solved this issue for using 50 pixel strings when my matrix is only 48 pixels across. . . .  Jeff

 

Back to top