Author Topic: Two new issues with F16V3  (Read 312 times)

Offline Xmas!

  • Full Member
  • ***
  • Join Date: Dec 2018
  • Location: Cocoa, FL
  • Posts: 162
  • Kudos: 2
Two new issues with F16V3
« on: January 21, 2019, 09:47:46 AM »
First issue is the voltage reading on V1. For some reason it shows a voltage of 6.4 instead of 12. V2 is fine. Checked V1 and PSU with multimeter and voltages are ~11.98 for V1. All jumpers are in the 7-13 volt range and set for V2 to power the board.


Second issue is that when I try to change the fan control settings on the F16V3. No matter what sensor or temperature I choose the GUI locks up when I hit save. I then refresh the screen and the settings are back to default.


Any help is greatly appreciated. Thanks.
My name is Steve and I'm just getting started. but I think this will become a huge hobby!!

Offline Poporacer

  • Sr. Member
  • ****
  • Join Date: Dec 2017
  • Location: Meridian Idaho
  • Posts: 350
  • Kudos: 5
Re: Two new issues with F16V3
« Reply #1 on: January 21, 2019, 10:00:39 AM »
The voltage issue is a known bug and has been reported and should be fixed before too long. I am surprised it hasn't been fixed yet as it was reported in October and a few commits have been submitted since then. I am out of town, but when I get back, I will try the Fan control issue to see if I can duplicate it.
If to err is human, I am more human than most people.

Offline Xmas!

  • Full Member
  • ***
  • Join Date: Dec 2018
  • Location: Cocoa, FL
  • Posts: 162
  • Kudos: 2
Re: Two new issues with F16V3
« Reply #2 on: January 21, 2019, 10:02:26 AM »
Thanks Pop

Offline David Pitts

  • Administrator
  • *****
  • Join Date: Mar 2013
  • Location: Falcon, CO
  • Posts: 3,927
  • Kudos: 76
Re: Two new issues with F16V3
« Reply #3 on: January 21, 2019, 02:00:26 PM »
The image shows B014 and we are on b022?
PixelController, LLC
PixelController.com

Offline Xmas!

  • Full Member
  • ***
  • Join Date: Dec 2018
  • Location: Cocoa, FL
  • Posts: 162
  • Kudos: 2
Re: Two new issues with F16V3
« Reply #4 on: January 21, 2019, 02:55:05 PM »
Ok Dave. I can update the version later. Already did the boo loader and firmware update. Thought that would update it completely. Thanks for bringing that to my attention.

Offline Xmas!

  • Full Member
  • ***
  • Join Date: Dec 2018
  • Location: Cocoa, FL
  • Posts: 162
  • Kudos: 2
Re: Two new issues with F16V3
« Reply #5 on: January 21, 2019, 05:25:26 PM »
Just updated thanks. At least now the onboard clock can be set and saved.
« Last Edit: January 21, 2019, 05:33:07 PM by Xmas! »

Offline Poporacer

  • Sr. Member
  • ****
  • Join Date: Dec 2017
  • Location: Meridian Idaho
  • Posts: 350
  • Kudos: 5
Re: Two new issues with F16V3
« Reply #6 on: January 21, 2019, 09:35:37 PM »
The image shows B014 and we are on b022?
I am on b022 and I can confirm that the voltage issue is still present on V1

Offline Xmas!

  • Full Member
  • ***
  • Join Date: Dec 2018
  • Location: Cocoa, FL
  • Posts: 162
  • Kudos: 2
Re: Two new issues with F16V3
« Reply #7 on: January 22, 2019, 07:58:01 AM »
Mine too Pop along with the fan control issue.

Offline Xmas!

  • Full Member
  • ***
  • Join Date: Dec 2018
  • Location: Cocoa, FL
  • Posts: 162
  • Kudos: 2
Re: Two new issues with F16V3
« Reply #8 on: February 15, 2019, 07:44:49 PM »
Has anyone else experienced the fan control not working on FPP? Wont accept any changes no matter what.

 

Back to top