Author Topic: Intro to the F40D-PB  (Read 438 times)

Online dkulp

  • Moderator
  • *****
  • Join Date: Sep 2013
  • Location: Framingham, MA
  • Posts: 1,372
  • Kudos: 75
Intro to the F40D-PB
« on: January 29, 2019, 10:51:58 AM »
The F40D-PB was designed to leverage the power of a PocketBeagle to drive ws2811 pixels.  The PocketBeagle is a smaller version of a BeagleBone Black that strips off a bunch of functionality (like HDMI ports, eMMC, etc...), but still provides the same PRU's, SD card, etc...


F40D-PB Capabilities:
  • 10 differential outputs for driving strings of ws281x pixels.   Each string can have 750 pixels (for 40fps)(power injection required) or even more pixels at slower frame rates.   
  • 2 of the differential outputs can be configured to provide DMX or PixelNet outputs.
  • On board Real Time Clock
  • On board temperature sensor
  • 4 pin I2C header for adding OLED status display
Requirements:
  • SD card with the latest FPP image
  • USB network adapter, either Wifi or Ethernet, that is supported by Linux.
Supported FPP Versions:
F40D-PB support will be added to FPP before they ship, likely for FPP 2.7.


Availability:
F40D-PB will be available as part of a group buy in early 2019.
« Last Edit: Today at 08:48:17 AM by dkulp »
Dan Kulp

Offline jeremy0203

  • Newbie
  • *
  • Join Date: Dec 2016
  • Location:
  • Posts: 43
  • Kudos: -5
Re: Intro to the F40D-PB
« Reply #1 on: February 02, 2019, 07:30:59 PM »
Haha and here I was working on this.

Offline Emuney18

  • Hero Member
  • *****
  • Join Date: Nov 2015
  • Location: Apex, NC
  • Posts: 535
  • Kudos: 7
Re: Intro to the F40D-PB
« Reply #2 on: February 04, 2019, 05:50:22 PM »
@dkulp what are the dimensions of this board?


Sent from my iPhone using Tapatalk

Online dkulp

  • Moderator
  • *****
  • Join Date: Sep 2013
  • Location: Framingham, MA
  • Posts: 1,372
  • Kudos: 75
Re: Intro to the F40D-PB
« Reply #3 on: February 04, 2019, 06:26:11 PM »
@dkulp what are the dimensions of this board?



99.695mm tall by 82.550mm wide.   


If possible, I keep the dimensions below 10cm each direction cause the cost per board generally jumps a fair amount if you go over 10cm. 




Offline TxBillbr

  • Newbie
  • *
  • Join Date: Dec 2017
  • Location: Georgetown, TX
  • Posts: 39
  • Kudos: 0
Re: Intro to the F40D-PB
« Reply #4 on: February 04, 2019, 06:44:39 PM »
Count me in. I love the F8PB, but ended up using the expansions due to PB port sensitivity. 


Maybe i'll finish up my radiation treatments early enough to get back on that documentation.

 

Back to top