Other Controllers and Hardware > Protocols - DMX/E1.31/DDP

Need help configuring DMX with F8-B or F8-PB latest version.

(1/1)

Sawdust:
Disregard this post - I reloaded 2.7 and all seems fine.

I had DMX working on a test v1 F8-B, but now Iíve got a new F8-PB running v2.7, I cannot get DMX to work on any of my F8 boards. 

Set BBB tab at 8 serial output
serial=DMX 512
Start address as 1
Port (13-16)  pin 1&2

As pixel ports they are working.
I thinking the test button didn't work,  be ending to be a test sequence. (Yes/no)
Assume my Vixen 3, Open DMX sequence is correct.

Any suggestions, comments or  check points?

Navigation

[0] Message Index

Go to full version