Author Topic: blinking lights  (Read 397 times)

Offline tombmatt

  • Full Member
  • ***
  • Join Date: Oct 2014
  • Location:
  • Posts: 195
  • Kudos: 0
blinking lights
« on: June 11, 2019, 09:50:37 PM »
I have 4 50 node strings connected to one port on my differential receiver 2 strings test good in that they follow the test pattern put out by my F16V2, the other 2 strings just blink in one color, the 1st string is power from the board the other 3 are all injected, is this a power issue?  have never had the blinking problem like this.

Offline Emuney18

  • Hero Member
  • *****
  • Join Date: Nov 2015
  • Location: Apex, NC
  • Posts: 593
  • Kudos: 7
Re: blinking lights
« Reply #1 on: June 12, 2019, 04:43:06 AM »
If these 4 strings are not soldered together then try each separately.  This doesnt sound like power but rather the last good or first bad pixel not passing all channels of data.   Do they blink the same color for each color from the controller test or do they only turn on for 1 color and are off for the others? 

Sent from my iPhone using Tapatalk


Back to top