Author Topic: Renard SS8, PIC Programmer, RenardESP, Spare Parts  (Read 214 times)

Offline ucfknight98

  • Newbie
  • *
  • Join Date: Jul 2019
  • Location:
  • Posts: 1
  • Kudos: 0
Renard SS8, PIC Programmer, RenardESP, Spare Parts
« on: July 21, 2019, 02:48:46 PM »
$60 Shipped in Continental US. Read description carefully.

Cleaning out some old hardware. I have an old Renard SS8 that I was last playing with as a test bed with a RenardESP.

The SS8 is missing one of the PIC chips as that was removed for the RenardESP input. The chip is included with the spare parts. Also, I do believe one of the channels is non-functional, likely a bad MOC3023 (multiple are included with the spare parts).

Also included are two RenardESP ( without the ESP. One has the correct LM117T regulator, the other has an incorrect 317 regulator (would need to be replaced, 4 of these parts included in spares).

Included is a PIC K150 programmer with cable.

Spare parts are:
Qty.  Part #                Descripttion                                    Ref
1       ACH-18.432-EK    Crystal Clock Oscillator, 18.432 MHz   U3
13     MOC3023             Optoisolator, Triac Driver                   M1-M8
9       BTA08-600CWRG  Triac, 6A 600V                                  T1-T8
2       GMA-10a              Fuse, Fast Acting 10A                        F1
1       534-3527C           Cover, Fuse   
1       WP710A10IT        LED, 3mm Red                                  FE, OE
1       WP710A10GT       LED, 3mm Green                               PWR, HB, ZC, SD
21     SX1100-B            Shunt   
2       IL410                  Optoisolator, Triac Driver (Alt to MOC3023)   M1-M8
5       680-RC                Resistor, Carbon Film 680 ohms         R6, R10-R17
5       180-RC                Resistor, Carbon Film 180 ohms         R18 R25
4       117T                   Renard ESP Regulator

Sold as-is. Please ask questions


Back to top