Author Topic: E131 over WiFi?  (Read 4657 times)

Offline TnGoat

  • Newbie
  • *
  • Join Date: Dec 2018
  • Location:
  • Posts: 7
  • Kudos: 0
E131 over WiFi?
« on: July 27, 2019, 11:19:58 PM »
I just flashed the 2.5 b22 firmware from: https://github.com/dpitts/f16v3_issues/tree/master/f4v3


The wifi connection was easy to setup but I can't seem to get it to respond to E131 data. Is that supported yet?

Offline JonB256

  • Supporting Member
  • ******
  • Join Date: Mar 2013
  • Location: Granbury, Texas
  • Posts: 5,296
  • Kudos: 126
    • Granbury Christmas Lights
Re: E131 over WiFi?
« Reply #1 on: July 28, 2019, 06:30:43 AM »
No, it isn't. The Wifi is restricted by bandwidth limitations (processor limits, not wifi)

You can access the Web interface for settings
The Falcon board will accept Remote sync packets from a Master (FPP or xSchedule)

E1.31 data is to be sent via CAT5

Offline TnGoat

  • Newbie
  • *
  • Join Date: Dec 2018
  • Location:
  • Posts: 7
  • Kudos: 0
Re: E131 over WiFi?
« Reply #2 on: July 28, 2019, 08:57:54 AM »
Thanks!

So I could load my sequences on a SD card and have them triggered over wifi from a FPP master.

Offline JonB256

  • Supporting Member
  • ******
  • Join Date: Mar 2013
  • Location: Granbury, Texas
  • Posts: 5,296
  • Kudos: 126
    • Granbury Christmas Lights
Re: E131 over WiFi?
« Reply #3 on: July 28, 2019, 11:26:20 AM »
Thanks!

So I could load my sequences on a SD card and have them triggered over wifi from a FPP master.

exactly. FSEQ files in 20fps (50ms), FSEQ v1 format

 

Back to top