Phoenix conectors

[relliott911]

Are the phoenix connectors for the Pi-Cap available somewhere? They are the 2.54MM pitch correct?

I have not been able to find them here or anywhere....

Thanks!

[AAH]

The pitch is 3.5mm. They are fairly readily available but there's a few slight variations in the fit.

[mikewlaymon]

In the store maybe?:

https://www.pixelcontroller.com/store/index.php?id_product=57&controller=product

[K-State Fan]

In the store maybe?:

https://www.pixelcontroller.com/store/index.php?id_product=57&controller=product

I do not see the connectors for the Pi-Cap in the store all I see are the ones for the F16 and F4

[doug.ryan@telus.net]

You cannot view this attachment.Not sure if you found the PiCap connectors yet but they are available at Digi-Key. part number 277-2413-ND. I bought some and they fit great.


https://www.digikey.ca/products/en?keywords=277-2413-nd

[relliott911]

Found them on Amazon...

3 pin https://www.amazon.com/gp/product/B06VX9R31H/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

2 pin https://www.amazon.com/gp/product/B06X3XT7WZ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

[Jaybo]

Found them on Amazon...

3 pin https://www.amazon.com/gp/product/B06VX9R31H/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

2 pin https://www.amazon.com/gp/product/B06X3XT7WZ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Those 3 pin connectors will work, but the 2 pin connectors are the wrong size. They are too small.

[Jaybo]

Just got both connectors in from Amazon.

The 2 pin is 5.08mm.
https://www.amazon.com/gp/product/B077GTYZVM/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

The 3 pin is 3.5 mm.
https://www.amazon.com/gp/product/B06VX9R31H/ref=ppx_yo_dt_b_asin_image_o04_s01?ie=UTF8&psc=1

I have both of these and can confirm they fit.