Author Topic: (Solved) Programming Channels for 16385 and above?  (Read 941 times)

Offline rdebolt

  • Supporting Member
  • ******
  • Join Date: Aug 2013
  • Location: Boise, ID
  • Posts: 554
  • Kudos: 3
    • Christmas in Boise
(Solved) Programming Channels for 16385 and above?
« on: November 22, 2014, 01:07:27 PM »
How do I program the 16 to start at channel 16385 and above?


Thanks,
Roger
« Last Edit: November 22, 2014, 01:37:55 PM by rdebolt »

Offline David Pitts

  • Administrator
  • *****
  • Join Date: Mar 2013
  • Location: Falcon, CO
  • Posts: 3,932
  • Kudos: 76
Re: Programming Channels for 16385 and above?
« Reply #1 on: November 22, 2014, 01:12:41 PM »
How do I program the 16 to start at channel 16385 and above?


Thanks,
Roger

16385 = 1 and so on. Use Pixelnet range 1-16384 to program then just put on the other jack 16385-32768 when finished.
PixelController, LLC
PixelController.com

Offline rdebolt

  • Supporting Member
  • ******
  • Join Date: Aug 2013
  • Location: Boise, ID
  • Posts: 554
  • Kudos: 3
    • Christmas in Boise
Re: Programming Channels for 16385 and above?
« Reply #2 on: November 22, 2014, 01:21:30 PM »
That is actually what I did, but I cannot get any output from xlights on 16385. I set my mega tree to have a start channel of 16385. Set F16 to universes 1&2, programmed F16 with a start channel of 1. No output to lights.


Thanks,
Roger

Offline rdebolt

  • Supporting Member
  • ******
  • Join Date: Aug 2013
  • Location: Boise, ID
  • Posts: 554
  • Kudos: 3
    • Christmas in Boise
Re: Programming Channels for 16385 and above?
« Reply #3 on: November 22, 2014, 01:22:57 PM »
Never mind Pi did not save my settings on output 3 of FPD. Retrying now.

A lot of changes need to be made ie. 64 universes in Xlights and Pi, then set output on FPD correctly. For some reason my Pi was not saving the changes (yes I was hitting the save button) rebooted Pi got everything saved and all is working so far....except my last F16 that is!

Roger
« Last Edit: November 22, 2014, 01:37:39 PM by rdebolt »

 

Back to top