Author Topic: Help needed to convert LOR ccr sequence  (Read 2537 times)

Offline David Pitts

  • Administrator
  • *****
  • Join Date: Mar 2013
  • Location: Falcon, CO
  • Posts: 3,943
  • Kudos: 80
Help needed to convert LOR ccr sequence
« on: December 13, 2014, 03:03:19 AM »
I bought an LOR superstar sequence that came with the rendered LMS file. I need to import into Xlights. Any help would be appreciated.

I have 16 CCR strips that have 50 channels eac

The first CCR is like this
Device Type = LOR
Network = Aux A
Unit = 2
Circuit 1,2,3,4,5 ... 150

The second CCR is like this
Device Type = LOR
Network = Aux A
Unit = 3
Circuit 1,2,3,4,5 ... 150

like this down to 13th one then

Device Type = LOR
Network = Regular
Unit = 0E
Circuit 1,2,3,4,5 ... 150

etc... to 16th

Help...


PixelController, LLC
PixelController.com

Offline David Pitts

  • Administrator
  • *****
  • Join Date: Mar 2013
  • Location: Falcon, CO
  • Posts: 3,943
  • Kudos: 80
Re: Help needed to convert LOR ccr sequence
« Reply #1 on: December 13, 2014, 03:50:11 AM »
OK. I have imported the sequence into Xlights using technique outlined here.
http://nutcracker123.com/forum/index.php?topic=333.0

Now i have a 2400 channel Xlights file where the Megatree starts at channel 1.  Now i need to combine this with a 32K channel file and move the megatree up to start at 16387 to match current channel layout??

 

 

Back to top