Author Topic: boscoyostudio p10 panels parts don't totally fit the aliexpress panels I bought.  (Read 1878 times)

Offline Livermore-Dad

  • Supporting Member
  • ******
  • Join Date: Nov 2013
  • Location: Livermore, CA
  • Posts: 483
  • Kudos: 0
But what I did was tap the untapped holes with a 1/4-20 tap through each and bought 1/4-20-1/2 screws. This allows me to get the rigidity that the other panels receive that have all their holes tapped.

I don't see how I can mount the power plate without modification, but not too worried about that yet. The screws are much larger obviously and the screw heads are not flush, but it does the job..
I know some stuff. For example i know I don't know anything.


Back to top