Author Topic: Pi/FPD/Ras  (Read 1681 times)

Offline PittFan

  • Full Member
  • ***
  • Join Date: Dec 2013
  • Location: Greenfield, NY
  • Posts: 118
  • Kudos: 0
Pi/FPD/Ras
« on: August 17, 2015, 08:27:32 PM »
I have not been very active with the lights as of late.  Infact, I have just gotten around to put my V1FPD together and start thinking about it.
My question is this:
Since the Pi and FPD connect via the ribbon cable, how does one install the RAS clock on the Pi?

Offline David Pitts

  • Administrator
  • *****
  • Join Date: Mar 2013
  • Location: Falcon, CO
  • Posts: 3,910
  • Kudos: 75
Re: Pi/FPD/Ras
« Reply #1 on: August 17, 2015, 11:11:22 PM »
You can populate the extra header on the FPD and connect it there. I think.
PixelController, LLC
PixelController.com

Offline MattBrown

  • Newbie
  • *
  • Join Date: Jun 2014
  • Location:
  • Posts: 39
  • Kudos: 3
Re: Pi/FPD/Ras
« Reply #2 on: August 18, 2015, 06:47:55 PM »
You can populate the extra header on the FPD and connect it there. I think.
That's the way I ran last year. It definitely works!

Offline PittFan

  • Full Member
  • ***
  • Join Date: Dec 2013
  • Location: Greenfield, NY
  • Posts: 118
  • Kudos: 0
Re: Pi/FPD/Ras
« Reply #3 on: August 19, 2015, 12:16:44 PM »
great!  Thanks guys.

Offline PittFan

  • Full Member
  • ***
  • Join Date: Dec 2013
  • Location: Greenfield, NY
  • Posts: 118
  • Kudos: 0
Re: Pi/FPD/Ras
« Reply #4 on: November 04, 2015, 07:23:57 PM »
Can you provide a picture of this setup?  When I put the rasclock on the header my Pi ribbon cable gets in the way and I can't get the Rasclock onto the header.

 

Back to top