Author Topic: programming F16v1.xx  (Read 831 times)

Offline FireMedic4Christ

  • Supporting Member
  • ******
  • Join Date: Mar 2013
  • Location: Brighton, CO
  • Posts: 252
  • Kudos: 1
programming F16v1.xx
« on: November 21, 2015, 11:15:34 PM »
Can a F16v1 and F16v1.03 be programmed with the Falcon Controller Software v1.2.3 using a RPi/FPD? The Method of communication list FPD (falcon pi pixelnet/dmx bridge), etherdongle, or serial. I do not have the dmx bridge and have been unsuccessful with an etherdongle. Testing via the web interface works fine.
Brian

Offline CaptainMurdoch

  • Administrator
  • *****
  • Join Date: Sep 2013
  • Location: Washington
  • Posts: 9,800
  • Kudos: 209
Re: programming F16v1.xx
« Reply #1 on: November 22, 2015, 12:48:05 AM »
Yes, you can program the F16 v1 via the Pi/FPD combination.  In the Falcon config software, set the communication method to FPD and set the IP to the IP of your Pi.
-
Chris

Offline David Pitts

  • Administrator
  • *****
  • Join Date: Mar 2013
  • Location: Falcon, CO
  • Posts: 3,929
  • Kudos: 76
Re: programming F16v1.xx
« Reply #2 on: November 22, 2015, 12:54:40 AM »
Also make sure your FPD is using 0.0.10 firmare
PixelController, LLC
PixelController.com

 

Back to top