Author Topic: up and running with one issue  (Read 1209 times)

Offline therealbigjim

  • Jr. Member
  • **
  • Join Date: Feb 2014
  • Location: Jacksonville Fl.
  • Posts: 85
  • Kudos: 0
up and running with one issue
« on: December 11, 2015, 10:19:27 PM »
I finally up and running after several x light  and time issues.  My tree is working but the start channel is appearing about a third of the way up the tree.  The images go to the top of the tree and continue from the bottom.   Same thing on every string for every sequence.  any suggestions where to start?
Jim Cannon

Offline CaptainMurdoch

  • Administrator
  • *****
  • Join Date: Sep 2013
  • Location: Washington
  • Posts: 9,856
  • Kudos: 214
Re: up and running with one issue
« Reply #1 on: December 11, 2015, 10:50:20 PM »
Can you attach a screenshot of your FPP Channel Output screen, this sounds like a StartChannel offset issue.  Does it work within xLights, if so, also attach a screenshot of the xLights network config screen.
-
Chris

Offline therealbigjim

  • Jr. Member
  • **
  • Join Date: Feb 2014
  • Location: Jacksonville Fl.
  • Posts: 85
  • Kudos: 0
Re: up and running with one issue
« Reply #2 on: December 12, 2015, 11:07:21 AM »
not using fpp still using my lap top.     Lap top to F16 v2 and daughter board  then out to various LOR and Lynx gear.  Everything DMX is below channel 600. the tree starts at 600.

Offline CaptainMurdoch

  • Administrator
  • *****
  • Join Date: Sep 2013
  • Location: Washington
  • Posts: 9,856
  • Kudos: 214
Re: up and running with one issue
« Reply #3 on: December 12, 2015, 11:31:07 AM »
Screenshot of the F16 v2 universe settings would be good then.  What start channel does your tree model start on?

Offline therealbigjim

  • Jr. Member
  • **
  • Join Date: Feb 2014
  • Location: Jacksonville Fl.
  • Posts: 85
  • Kudos: 0
Re: up and running with one issue
« Reply #4 on: December 12, 2015, 01:19:24 PM »
my tree model starts at channel 600

Offline David Pitts

  • Administrator
  • *****
  • Join Date: Mar 2013
  • Location: Falcon, CO
  • Posts: 3,932
  • Kudos: 77
Re: up and running with one issue
« Reply #5 on: December 12, 2015, 02:54:10 PM »
Called Jim and it is all squared away.
PixelController, LLC
PixelController.com

Offline therealbigjim

  • Jr. Member
  • **
  • Join Date: Feb 2014
  • Location: Jacksonville Fl.
  • Posts: 85
  • Kudos: 0
Re: up and running with one issue
« Reply #6 on: December 12, 2015, 03:04:43 PM »
Yes dave is a life saver all is well other then a dead power supply....down to my last one. but the show is up and running.

 

Back to top