Author Topic: too far to program properly  (Read 974 times)

Offline t.jo13

  • Supporting Member
  • ******
  • Join Date: Dec 2014
  • Location:
  • Posts: 186
  • Kudos: 2
too far to program properly
« on: December 24, 2015, 09:42:42 AM »
I have posted my Issue here: http://falconchristmas.com/forum/index.php/topic,4001.msg41875.html#new
so I am wondering if I am trying to program controllers to far. I have 75 ft  of cable to fpp - fpd port 1-4  then 50 ft to f16. Otherwise I cannot find anything else that could cause my Issue. Its pretty straight forward programming, 100 nodes per output, using 8 ports total folding done in xlights . I have tried to find another topic with this issue, no luck. If it was off 180 degrees I I would Know its an addressing issue, but 90 degrees is really throwing me off, so that's why I am wondering if it too far.

Joe

Offline zwiller

  • Falcon Beta Team
  • **
  • Join Date: Mar 2013
  • Location: Sandusky, OH
  • Posts: 994
  • Kudos: 13
Re: too far to program properly
« Reply #1 on: December 30, 2015, 06:36:14 AM »
Hopefully you got this fixed.  I would say it's not too far.  I am running about same length and no issues.  If not fixed have you asked over at XL?  Looks like XL issue to me.  Only other thing is maybe you have programmed string direction wrong.  IE s/b backward instead of forward.   
Sam
 Last year's video: https://vimeo.com/150560653

Offline t.jo13

  • Supporting Member
  • ******
  • Join Date: Dec 2014
  • Location:
  • Posts: 186
  • Kudos: 2
Re: too far to program properly
« Reply #2 on: December 30, 2015, 08:04:14 AM »
Yes Sam ,
I finally solved that issue. I had to reflash the pic and then it worked as expected . I forgot to post solved. Now to solve all the other issues
Have a good day

Joe

 

Back to top