Author Topic: Reanrd PX1 Matrix help  (Read 1725 times)

Offline Kartingted

  • Newbie
  • *
  • Join Date: Dec 2015
  • Location:
  • Posts: 2
  • Kudos: 0
Reanrd PX1 Matrix help
« on: December 10, 2015, 01:56:06 PM »
Hi all
I have a Px1 running a 200 pixel matrix,
there are 10 rows 20 columns in a zig zag starting from the bottom left,
I set all of this up in vixen3 when I mapped my channels I revered the order for the even rows, everything works fine in vixen but in my pi I get everything going incorrect, it looks like the zig zag from vixen did not make the patching when I exported the file,

is there anyway around this as I cant do it in the hardware.

Thanks in advance


Offline CaptainMurdoch

  • Administrator
  • *****
  • Join Date: Sep 2013
  • Location: Washington
  • Posts: 9,856
  • Kudos: 214
Re: Reanrd PX1 Matrix help
« Reply #1 on: December 11, 2015, 03:27:32 PM »
This could be done in FPP, but it would be a painful channel remap of all the channels involved.  You may want to ask on the Vixen3 forums  to see if there is a way to get this reflected in the exported data.  I don't know where the reverse comes into play in Vixen3.


Back to top