Author Topic: rPi-28D Pi cape with pixels and dmx  (Read 1538 times)

Offline AAH

  • Hero Member
  • *****
  • Join Date: Jul 2014
  • Location: Australia
  • Posts: 740
  • Kudos: 19
  • Blinky blinky blinky
    • I love blinky lights
rPi-28D Pi cape with pixels and dmx
« on: September 20, 2016, 01:57:19 AM »
Raspberry Pi Adapter PCB to support 2 2811 strings, 1 2801 string and 1 DMX output
      • Supports 2 2811 pixel outputs
      • Supports 1 2801 pixel output
      • Supports 1 non-isolated DMX outputs
      • Runs under Falcon Player (FPP)
      • Has 75HC245 to level shift signals from Raspberry Pi 3.3V logic to 5V logic
      • Can power cape and Raspberry Pi from 5V or 12V input
      • Uncommitted connection to GPIO pins for external use. Powering down, starting show, changing sequence etc.
      • Mounting holes to suit Pi 2, Pi 3 and Pi Zero
      • Real Time Clock (RTC) for show scheduling
      • Supplied with M2.5 Nylon spacers to separate the Pi and rPi-28D
      • 3 uncommitted power inputs for the 3 pixel outputs. Can be fused prior to rPi-28D. 5V, 12V or 24V pixels can be connected
http://www.hansonelectronics.com.au/product/rpi-28d/

Note: Raspberry Pi, SD or micro SD card and USB thumbdrive are not supplied. Included in photos to show the application.

Online Pfad

  • Newbie
  • *
  • Join Date: Sep 2016
  • Location:
  • Posts: 49
  • Kudos: 0
Re: rPi-28D Pi cape with pixels and dmx
« Reply #1 on: September 30, 2016, 11:56:50 AM »
Does this support virtual strings?

Offline jnealand

  • Developer
  • ******
  • Join Date: Aug 2013
  • Location: Kennesaw, GA
  • Posts: 2,947
  • Kudos: 68
Re: rPi-28D Pi cape with pixels and dmx
« Reply #2 on: September 30, 2016, 01:59:17 PM »
That is a Falcon F16v2r feature this is just a controller board all smarts are really in FPP and virtual strings is not in the Player.
Jim Nealand
Kennesaw, GA all Falcon controllers, all 12v Master Remote Multisync with Pi and BBB P10 and P5

Online Pfad

  • Newbie
  • *
  • Join Date: Sep 2016
  • Location:
  • Posts: 49
  • Kudos: 0
Re: rPi-28D Pi cape with pixels and dmx
« Reply #3 on: October 14, 2016, 09:47:53 PM »
Thank you

Offline CaptainMurdoch

  • Administrator
  • *****
  • Join Date: Sep 2013
  • Location: Washington
  • Posts: 9,856
  • Kudos: 214
Re: rPi-28D Pi cape with pixels and dmx
« Reply #4 on: October 19, 2016, 11:24:22 PM »
Does this support virtual strings?

Virtual Strings are on the FPP ToDo list, but I haven't got to it yet.  When I add it to FPP, the plan is to set it up to allow integration into all of the direct-attached string outputs that FPP supports on the Pi and BBB including the Pi string hats and the F16-B/F4-B outputs.
-
Chris

Online Pfad

  • Newbie
  • *
  • Join Date: Sep 2016
  • Location:
  • Posts: 49
  • Kudos: 0
Re: rPi-28D Pi cape with pixels and dmx
« Reply #5 on: October 23, 2016, 11:17:12 AM »
You must not get much sleep.   :D

Offline CaptainMurdoch

  • Administrator
  • *****
  • Join Date: Sep 2013
  • Location: Washington
  • Posts: 9,856
  • Kudos: 214
Re: rPi-28D Pi cape with pixels and dmx
« Reply #6 on: October 24, 2016, 09:59:00 AM »
You must not get much sleep.   :D

I don't, but my TODO list is also a few pages long.  Most development time is earlier in the  year, but had a few things popup so didn't get as much done this year as I hoped.  Am gearing up for January though.... :)

 

Back to top