Author Topic: Xlights > F16V2-R > LOR display  (Read 1532 times)

Offline Mikael

  • Newbie
  • *
  • Join Date: Dec 2016
  • Location:
  • Posts: 3
  • Kudos: 0
Xlights > F16V2-R > LOR display
« on: December 29, 2016, 05:43:54 AM »
Hi everyone :)
I'm a french user of a LOR display ( ok that 2 bad points for me :p ) and for 2017 I want to use smarts leds.
Since I have test Xlights i falling in love with this software because he is more simple to use than Showtime  Sequencing.
Actually my display is composed by :
2 CTP16PC
6 CMB24
2 CCR


If I switch the LOR display in DMX and add a F16V2-R  is the setup below correct ?





Thank :)



Offline rlemery

  • Sr. Member
  • ****
  • Join Date: Feb 2015
  • Location: Morganton,NC
  • Posts: 370
  • Kudos: 5
Re: Xlights > F16V2-R > LOR display
« Reply #1 on: December 29, 2016, 06:58:43 AM »
That set up is correct . The f16v2-r will run the lor controllers in dmx mode. You can even set the jumpers so you don't need a crossover cable. You can also add a raspberry pi v3 and Fpp software to the mix and eliminate the computer. The new f16v3 that is coming soon will also have built in wireless.
 

Sent from my SM-G920V using Tapatalk

728 lor channels
5492 pixels

Offline Mikael

  • Newbie
  • *
  • Join Date: Dec 2016
  • Location:
  • Posts: 3
  • Kudos: 0
Re: Xlights > F16V2-R > LOR display
« Reply #2 on: December 29, 2016, 07:19:39 AM »
Thanks for your answer :)
Did you know what kind of network did I have to configure in Xlights for the LOR display ?





Offline garyh

  • Jr. Member
  • **
  • Join Date: Dec 2015
  • Location:
  • Posts: 88
  • Kudos: 3
Re: Xlights > F16V2-R > LOR display
« Reply #3 on: December 29, 2016, 07:32:14 AM »
https://www.youtube.com/watch?v=TodSY4fZq-Q


I used this video.  Basically you have to add the LOR universe to the E1.31 page (I recommend Universe 1) then in Serial Outputs you need to put your info in there to make that universe go out the particular port.  Don't use Serial Port 1, it does Pixelnet also.. I used Port 2.

Offline Mikael

  • Newbie
  • *
  • Join Date: Dec 2016
  • Location:
  • Posts: 3
  • Kudos: 0
Re: Xlights > F16V2-R > LOR display
« Reply #4 on: December 29, 2016, 07:48:33 AM »
Thanks a lot !  ;)

 

Back to top