Author Topic: F16v1 Not Passing a PixelNet Signal Through Properly  (Read 1770 times)

Offline zwiller

  • Falcon Beta Team
  • **
  • Join Date: Mar 2013
  • Location: Sandusky, OH
  • Posts: 994
  • Kudos: 13
Re: F16v1 Not Passing a PixelNet Signal Through Properly
« Reply #15 on: November 14, 2017, 08:03:53 AM »
No issues with the newer ones.  It's just that replacing chips/resoldering socket would not fix a v1.0 since board pinouts were off on them. 
Sam
 Last year's video: https://vimeo.com/150560653

Offline JonB256

  • Supporting Member
  • ******
  • Join Date: Mar 2013
  • Location: Granbury, Texas
  • Posts: 5,130
  • Kudos: 118
    • Granbury Christmas Lights
Re: F16v1 Not Passing a PixelNet Signal Through Properly
« Reply #16 on: November 14, 2017, 08:31:37 AM »
No issues with the newer ones.  It's just that replacing chips/resoldering socket would not fix a v1.0 since board pinouts were off on them.

True - the pin layout on the first board was based on the SMD version of the Max chip, not the DIP version. They weren't quite the same even though they have the same # of outputs. I had a two of them and soldered in cris-cross jumpers to compensate.

 

Back to top