Author Topic: [Solved] Configure Vixen light for Mega tree with 100lights  (Read 893 times)

Offline fabien

  • Newbie
  • *
  • Join Date: Nov 2017
  • Location:
  • Posts: 14
  • Kudos: 0
[Solved] Configure Vixen light for Mega tree with 100lights
« on: December 01, 2017, 11:13:51 AM »
Hello everybody,

I'm trying to used WS2811 lights with falcon pi player and Vixen Light.
The leds are connected to GPIO18 with 74HCT125.
Leds are working well because when i'm using the function "Display testing" on falcon pi player, all the leds light on and change colours.

However, When I had created and export a sequence on vixen light, it doesn't work.
Just a few leds light on.
I think I have a wrong configuration on vixen light but I don't know which controller I must put.
Have you got any Idea?
Thank you in advance.
Had a good day.
« Last Edit: December 04, 2017, 01:58:08 PM by fabien »

Offline pixelpuppy

  • Hero Member
  • *****
  • Join Date: Aug 2015
  • Location: Dallas, TX
  • Posts: 1,430
  • Kudos: 45
Re: Configure Vixen light for Mega tree with 100lights
« Reply #1 on: December 01, 2017, 01:23:41 PM »
They are "Streaming ACN (E1.31)" controllers.
-Mark

Offline fabien

  • Newbie
  • *
  • Join Date: Nov 2017
  • Location:
  • Posts: 14
  • Kudos: 0
Re: Configure Vixen light for Mega tree with 100lights
« Reply #2 on: December 02, 2017, 02:29:42 PM »
Thank you so much for your answer!
I test It tomorrow.



Offline fabien

  • Newbie
  • *
  • Join Date: Nov 2017
  • Location:
  • Posts: 14
  • Kudos: 0
Re: Configure Vixen light for Mega tree with 100lights
« Reply #3 on: December 04, 2017, 01:57:10 PM »
They are "Streaming ACN (E1.31)" controllers.
Thank you very Much Pixelpuppy,

I have configure as you have said it's ok.

Have a good day.

Fabien
« Last Edit: December 04, 2017, 02:43:23 PM by fabien »

 

Back to top