Author Topic: Installing F16v3 and FPP on the board without enclosure  (Read 773 times)

Offline MrTeaIOT

  • Jr. Member
  • **
  • Join Date: Dec 2017
  • Location:
  • Posts: 98
  • Kudos: 0
Installing F16v3 and FPP on the board without enclosure
« on: February 20, 2018, 08:34:17 PM »
I plan to install my F16v3 board, Power supplies, fuses, Falcon Player and Volt/Amp meters all in one centralizer location at the inside of the garage.  All these will be in fixed location without enclosure.  This I do not have to worry about multiple enclosures, heat problem, water proofing or need any quick connectors.  I have 2ft x 3ft space to work with.  I will put a 3/4" board for all to screw on to.  I know the con on doing this centralize system but I like more pro in doing so.  I installed a high end car audio before so my experience with 12v neatly wired circuit help.   For my house this is the best since garage is located in the center.   Any members doing so please share some photos and ideas.     

 

Back to top