Author Topic: Pixie16 setup  (Read 270 times)

Offline Ntjp

  • Newbie
  • *
  • Join Date: Sep 2018
  • Location:
  • Posts: 30
  • Kudos: 0
Pixie16 setup
« on: October 21, 2018, 04:02:50 PM »
Asked a question in FPP but should have asked it here. Need to setup a Pixie16 using XLights on a Pixie16.  The only answer I got before was did not think could do that because Pixie!6 was not DMX.  However the Pixie16 has a DMX switch setting.  I have tried several set ups but am only able to get the first 6 nodes on the strings to light up.  Please HELP   Surely there is one out there that has bought and setup a Pixie16....   

Offline Todd

  • Full Member
  • ***
  • Join Date: Jan 2017
  • Location: Kimberly, Wisconsin
  • Posts: 229
  • Kudos: 5
Re: Pixie16 setup
« Reply #1 on: October 28, 2018, 05:47:07 PM »
Are you sure your strings are set up properly in FPP?
Todd L.
Kimberly, WI

Falcon F16V3 F48, FPP, X-Lights, LOR, Pi 3B

Offline Ntjp

  • Newbie
  • *
  • Join Date: Sep 2018
  • Location:
  • Posts: 30
  • Kudos: 0
Re: Pixie16 setup
« Reply #2 on: November 02, 2018, 09:01:26 AM »
As a followup for anyone reading this.  Got with LOR and the Pixie will only work with LOR.  It does not have DMX or E131.  So, a Pixie16 cannot be set up to run XLights.

Offline Todd

  • Full Member
  • ***
  • Join Date: Jan 2017
  • Location: Kimberly, Wisconsin
  • Posts: 229
  • Kudos: 5
Re: Pixie16 setup
« Reply #3 on: November 18, 2018, 07:00:27 PM »
Well that sucks.

 

Back to top