Author Topic: F4v3 @24v with expansion  (Read 100 times)

Offline uncledan

  • Newbie
  • *
  • Join Date: Jan 2016
  • Location:
  • Posts: 10
  • Kudos: 0
F4v3 @24v with expansion
« on: November 05, 2018, 08:52:37 PM »
F4v3 powered at 24v receiver @12v So... I removed the R80 resistor ran test patterns and all was well.  Plugged in the expansion, ran test pattern and nothing.  Upon closer inspection a few random pixels were blue-ish.  I removed the diff expansion and test patterns worked fine.  Above the 40pin connector on F4v3 it says "See manual for input voltages >13v"  yet I cant find anything in the manual.  Any thoughts? 

Offline uncledan

  • Newbie
  • *
  • Join Date: Jan 2016
  • Location:
  • Posts: 10
  • Kudos: 0
Re: F4v3 @24v with expansion
« Reply #1 on: November 06, 2018, 10:17:51 PM »
bump... anyone powered a F4v3 @24v with a diff expansion or have any input?

 

Back to top