Author Topic: 4 port receiver into F16v2, keeping DMX  (Read 372 times)

Offline djgra79

  • Newbie
  • *
  • Join Date: Dec 2014
  • Location: Melbourne, Australia
  • Posts: 13
  • Kudos: 0
4 port receiver into F16v2, keeping DMX
« on: November 09, 2018, 10:39:00 PM »
Hi All.


I have an F16V2 (red) and I'd like to run 1x 4-port receiver (white) from the serial/DMX port and only run 2x ouputs from it, so I can still use a DMX output from the main board to run some moving head lights.
Is this possible? If so, what are the recommended connections and then setups required on the interface?


Offline djgra79

  • Newbie
  • *
  • Join Date: Dec 2014
  • Location: Melbourne, Australia
  • Posts: 13
  • Kudos: 0
Re: 4 port receiver into F16v2, keeping DMX
« Reply #1 on: November 11, 2018, 01:08:37 AM »
SOLVED. I had the wrong settings on the Falcon Serial Ports page.
Happy to report that I've got 2x ports of pixels running AND my DMX moving heads :)

 

Back to top