News:

Server migration complete, Welcome to version 2.1.1

+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Site Stats

Members
Total Members: 15473
Latest: vb
New This Month: 95
New This Week: 10
New Today: 9
Stats
Total Posts: 126849
Total Topics: 15550
Most Online Today: 74
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 3
Guests: 42
Total: 45

LOR CCR Ribbons and Pixels with Falcon Controller

Started by DaSarge, November 13, 2022, 08:17:11 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

DaSarge

Hello All:
  I currently am using LOR controllers and Pixels and Cosmic Color Ribbons.  I want to start making the plunge to leave LOR and move over to Falcon Controllers.  Will these products (Pixels/CCRs) work with Falcon Controllers.  I want to move over to xLights from LOR Software.  (I think xLights allow more flexibility than LOR software)  How do I do this, and what do I need to purchase to allow this to work?

Thanks

Dave

JonD

You may not need to buy anything.  In general most things are compatible.  Xlights can support LOR products without a Falcon, and you can use Falcon controllers to run your LOR display.  You probably have everything you need to switch, but you might want to wait until next season.

DaSarge

Quote from: JonD on November 13, 2022, 10:29:19 AMYou may not need to buy anything.  In general most things are compatible.  Xlights can support LOR products without a Falcon, and you can use Falcon controllers to run your LOR display.  You probably have everything you need to switch, but you might want to wait until next season.
The plan is to run LOR this season, and do the conversion over to xLights for next season.  Has anyone tried to get the LOR controllers to work with xLights?  I tried last year unsuccessfully.

Dave

K-State Fan

#3
I have 4 LOR controllers in my show that are programed with xLights. Three of them run off a serial port on my F4V3 and one of them I use a LOR dongle hooked to a raspberry pi.

JonD

Since you are not listing specific LOR model numbers... generically there is a good chance everything you have now will work in xlights.  There are some exceptions, but typically even then there are workarounds.  For example, the Pixielink and other converters are available.  Now whether if you will want to go through the hassle is another story.  I had a LOR pixel controller that would work fine in xlights, but it was kind of a pain to configure, so I replaced with a Falcon to keep things simple and consistent. 

DaSarge

Quote from: JonD on November 14, 2022, 07:33:41 AMSince you are not listing specific LOR model numbers... generically there is a good chance everything you have now will work in xlights.  There are some exceptions, but typically even then there are workarounds.  For example, the Pixielink and other converters are available.  Now whether if you will want to go through the hassle is another story.  I had a LOR pixel controller that would work fine in xlights, but it was kind of a pain to configure, so I replaced with a Falcon to keep things simple and consistent. 
2 of my Pixel controllers are 1. A 2 channel that drives 2x100 Pixel strings, and the other is a Pixcon16 that controls 16 CCR's.  All currently under LOR control

JonD

Not familiar with "2 of my Pixel controllers are 1. A 2 channel that drives 2x100 Pixel strings".  Is that a model number??  The pixiecon16 should be E1.31 compatible and fully complaint. 


DaSarge

Quote from: JonD on November 14, 2022, 05:50:57 PMNot familiar with "2 of my Pixel controllers are 1. A 2 channel that drives 2x100 Pixel strings".  Is that a model number??  The pixiecon16 should be E1.31 compatible and fully complaint. 


ok, let me get a little further in the weeds......no pun intended with this one.  I have these 2 items
https://store.lightorama.com/collections/rgb-packages/products/pixie-2-bundle
https://store.lightorama.com/collections/rgb-controllers-mounted/products/pixie16-12v-complete

JonD

As for the pixie2, I had the Pixie4d and threw it in the trash.  The LOR protocol sucks, and to convert from LOR to DMX you lose ports in the conversion.  They were limited to 1 universe at 512 channels (170 pixels), basically limited to 3 ports of 50 pixels.  200 pixels equals 600 channels, so you would need to use them in LOR mode to run 200 pixels.

The pixie16d is different than the Pixiecon16 and not in a good way.  You would have less issues with that one, but that series is not a great product. 

If you're on a tight budget you could make them work.  If you enjoy life and have some spare change around, you would be happier with a Falcon F16v4 with a Smart Receiver or two. 


Support FPP

+- Recent Topics

WLED Plugin not working by Negativez0
Today at 07:14:00 AM

FPP connect by rudybuddy
Today at 06:53:17 AM

EDM Audio and RemoteFalcon plugin conflict by JonD
Today at 06:45:27 AM

F48 with Daisy Chained Smart Receivers by JonD
Today at 06:14:02 AM

USB Wifi Adapter by jem5136
Today at 05:37:34 AM

show locks me out of falcon player by breese
Today at 04:11:38 AM

Unable to get DHCP after FPP install by Jlwright325
November 27, 2022, 11:31:30 PM

What is the second best way to get rid of pixel gap errors? by k6ccc
November 27, 2022, 10:32:34 PM

FPP Scheduler duplicate by Aaron Maue
November 27, 2022, 09:24:20 PM

Audio Stalls on 8th music sequence by JonD
November 27, 2022, 08:09:16 PM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod