News:

LATEST RELEASE:  FPP 6.1 - Download from here - https://github.com/FalconChristmas/fpp/releases/tag/6.1

+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Site Stats

Members
Total Members: 15301
Latest: magicx
New This Month: 4
New This Week: 2
New Today: 2
Stats
Total Posts: 125131
Total Topics: 15248
Most Online Today: 86
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 7
Guests: 41
Total: 48

Config

Started by CEALEYSM, January 05, 2022, 07:56:07 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

CEALEYSM

I am running a Raspberry Pi4  with falcon v5 software I am having trouble configing my Sandevice E682 controller. Pi4 ETH0 is 10.0.1.100 Sandevice controller ip is 192.168.1.206. How do i config the controller to be seen by the Pi4?

k6ccc

#1
Those two devices are not on the same IP subnet.  Change the E682 to an address on the 10.0.1.x subnet or change the Pi to some address on the 192.168.1.x subnet.
On the SanDevices controllers, you must specify Unicast vs multicast, so make sure that matches the format used by the Pi.
Using LOR (mostly SuperStar) for all sequencing - using FPP only to drive P5 and P10 panels.
My show website:  http://newburghlights.org

Jim

jnealand

How did the Pi4 get that address?  If that is an address on you home network I would change it to the 192.168.1.x network.  The wifi of the Pi4 should be configured to be on your home network and that is how you should access it unless you are going to run all connections thru a switch.  What else will be on your show network config?
Jim Nealand
Kennesaw, GA all Falcon controllers, all 12v Master Remote Multisync with Pi and BBB P10 and P5

Support FPP

+- Recent Topics

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod