News:

Server migration complete, Welcome to version 2.1.1

+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Site Stats

Members
Total Members: 15659
Latest: PaulDzRGB
New This Month: 9
New This Week: 3
New Today: 0
Stats
Total Posts: 128433
Total Topics: 15791
Most Online Today: 48
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 0
Guests: 29
Total: 29

Bad Pixel?

Started by djmc2002, November 23, 2016, 09:57:45 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

djmc2002

Thoughts. Is this a bad pixel?  Those strips are 120, 60 up and down. It is failed about 40 on the up side (pixel 40 of 120) that stip will not turn off.  If so which pixel should I change. The last lit on or the first dark or both?


Sent from my iPhone using Tapatalk

algerdes

Does the feed from the controller go to the one that has the white lights, or to the dark strip?

I'm thinking that it may not be a bad pixel.  At least I would be looking elsewhere before going at it with a pair of cutters.  A bad pixel would work up to it, then everything beyond would mess up.

To find out for sure: try feeding a known good signal to the strip, possibly from a neighboring strips.  (You could do this at the controller.)  If the strip comes alive, you know it isn't that strip.
Sequencers: Vixen3 and xLights
Players: FPP and xSchedule Controllers:  Renards - SS24/SS16; E1.31 - San Devices E682 - Falcon F16, F4, F48 - J1Sys - DIYLEDExpress E1.31 Bridges.  Much more!

pmiller

Check your power connection. I had a couple of props including my pixel tree freezes on all white. Ended up being a loose wire. When I assembled my controllers it was 90 degrees out. When I put everything up I doubled checked to make sure all connections were tight. It's now zero degrees and the same thing happened. As a matter of fact the positive connection to the board was almost out of the terminal. I tightened it and so far so good. The weather creates expansion and contraction and that's why the connections were loose.

Sent from my SM-T710 using Tapatalk


Support FPP

+- Recent Topics

F16V3 with 2 expansion boards at 40 fps MAX PIXELS per output? by BirdingPix
Today at 02:49:02 PM

Warning/Error: Network incomplete frames hit 250. by JonD
Today at 10:59:15 AM

F48V4-NS at 40 fps using all 48 pixel output ports? by Poporacer
February 06, 2023, 10:27:09 AM

Unable to update RPi 5.5 to latest version by JonB256
February 05, 2023, 07:23:16 PM

help getting started, next step? by rayster
February 05, 2023, 04:24:09 PM

F48v4NS - Pi or No Pi? by joeyblasko
February 05, 2023, 09:15:33 AM

Huidu Controllers LED matrix by CaptainMurdoch
February 04, 2023, 10:18:47 AM

FPP6.2 universes by darylc
February 03, 2023, 08:48:57 PM

F16v4 Ports vs Universe Configuration Question by k6ccc
February 03, 2023, 09:32:48 AM

Need Expert Advise on F16v4 Ports vs Universe Configuration by Kairus
February 03, 2023, 09:32:33 AM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod