News:

LATEST RELEASE:  FPP 6.1 - Download from here - https://github.com/FalconChristmas/fpp/releases/tag/6.1

+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Site Stats

Members
Total Members: 15463
Latest: Lwarnell01
New This Month: 86
New This Week: 4
New Today: 4
Stats
Total Posts: 126792
Total Topics: 15537
Most Online Today: 90
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 2
Guests: 63
Total: 65

Power Distribution with Distro Board

Started by tmarshall, September 30, 2017, 10:22:29 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

tmarshall

I was wondering what the general consensus is for wiring long pixel strings using a power distro board for power injection. Do you connect the positives between each string, or do you only connect the data and ground between strings?


I have done it both ways, and both ways have seemed to work. But, it seems to me that if you connect all of the positive wires between strings and you blow one of the fuses, the other fused power points will draw more power to compensate, and you may likely have a cascade effect and pop multiple if not all of the fuses in the distro board.


Most of the Power Injection posts I have read usually have one large fuse for all the strings on a given channel, but that would be too much power per distro board output.


What are your recommendations?


See diagram for clarification. (Diagram does not show ground from controller, but It would be connected in as well)

JonB256

Your reason for not connecting Positives is a good one.
The other reason frequently given is that the voltage regulation in different power supplies may begin to fluctuate when they sense a voltage change from each other. It could cause weird voltage oscillations and should be avoided.

So, the V- (DC ground) should be tied together. The V+ should not.
Long time Falcon, FPP and xLights user

tmarshall

Quote from: JonB256 on September 30, 2017, 11:05:00 AM
Your reason for not connecting Positives is a good one.
The other reason frequently given is that the voltage regulation in different power supplies may begin to fluctuate when they sense a voltage change from each other. It could cause weird voltage oscillations and should be avoided.

So, the V- (DC ground) should be tied together. The V+ should not.
Yeah, i know about the issues associated with cross connecting power supply positives. I this case, I am only using one power supply to drive about 400 pixels

Thanks

sklankowski

Had this same question when connecting two string together.  We needed to insert power from the end of string one to provide enough power reduce yellowing, and had about 2 meters of light to go on string two.  As long as the lights are on the same transformer, but can understand the cascade effect of blowing fuses.  A risk in the design versus capabilities of setup, IMO. 

Support FPP

+- Recent Topics

What is the second best way to get rid of pixel gap errors? by dkulp
Today at 08:33:03 AM

MultiSync copying of Show Files not working in FPP 6.1.1 by dkulp
Today at 12:12:07 AM

running event date from within xlights sequence. by Poporacer
November 26, 2022, 11:26:24 PM

Wifi set up with no wired connection by Poporacer
November 26, 2022, 11:23:59 PM

p10 panel not working with xlight output by pennymoor
November 26, 2022, 11:07:29 PM

F16v3 Won't boot or power on by rjhodgefamily
November 26, 2022, 07:54:39 PM

Cannot Ping e1.31 Channel Data Target by mwolbert
November 26, 2022, 07:49:25 PM

Controller not keeping accurate time by JonD
November 26, 2022, 07:31:07 PM

show locks me out of falcon player by rudybuddy
November 26, 2022, 07:16:32 PM

Daisy Chain PSU by schbrownie
November 26, 2022, 07:00:52 PM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod