News:

LATEST RELEASE:  FPP 6.1 - Download from here - https://github.com/FalconChristmas/fpp/releases/tag/6.1

+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Site Stats

Members
Total Members: 15486
Latest: Cousin_Eddie
New This Month: 108
New This Week: 22
New Today: 6
Stats
Total Posts: 126958
Total Topics: 15571
Most Online Today: 108
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 3
Guests: 35
Total: 38

DMX, F16v2r, Stage Wash 7x 10w LED Moving head

Started by stlscott, November 13, 2018, 11:21:31 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

stlscott

Ok let me just start by saying I feel stupid and frustrated.  This is my 3rd Christmas (2018) doing pixels.  I have no problem with the 5v strips nor the 12v nodes. This year I wanted to add a pair of moving-head lights (one being controlled via DMX and one just following the first one).  Anyway, I can't seem to get it to work for the life of me.  I took a standard network cable (10'), cut the end off of one end, opened up a 3-connector XLR blank to make a cable.  The network cable is standard and the orange pair are first.   I soldered Wh-Orange to Pin #3 (D+), both browns to Pin #1 (Ground), and Solid-orange to Pin #2 (D-).  I plugged the network cable into 2, 3, and 4th port on the F16v2R hoping to get one of them to work (never used any of them before).  No luck, it didn't matter which port I configured, it didn't affect the motion head light.  I setup the serial-port port #2 on the Falcon to be DMX, universe 48, starting channel #1.  I matched this in Xlights 2018.v42 and it just doesn't work.  I also made a terminator using a 100 ohm resister to pug into the other DMX port.  Again, nothing happens on XLIGHTS when I move the slides for the DMX device.  I made a NEW cable today thinking maybe I did something wrong or the network cable was bad... nope, didn't do anything.  I did put the falcon into test mode and the head would move up and down and only display red & green (even though it's an RGBW). 


I know this is NOT supposed to be this difficult, what the heck am I doing wrong.

ebrown19721972

Quote from: stlscott on November 13, 2018, 11:21:31 PM
Ok let me just start by saying I feel stupid and frustrated.  This is my 3rd Christmas (2018) doing pixels.  I have no problem with the 5v strips nor the 12v nodes. This year I wanted to add a pair of moving-head lights (one being controlled via DMX and one just following the first one).  Anyway, I can't seem to get it to work for the life of me.  I took a standard network cable (10'), cut the end off of one end, opened up a 3-connector XLR blank to make a cable.  The network cable is standard and the orange pair are first.   I soldered Wh-Orange to Pin #3 (D+), both browns to Pin #1 (Ground), and Solid-orange to Pin #2 (D-).  I plugged the network cable into 2, 3, and 4th port on the F16v2R hoping to get one of them to work (never used any of them before).  No luck, it didn't matter which port I configured, it didn't affect the motion head light.  I setup the serial-port port #2 on the Falcon to be DMX, universe 48, starting channel #1.  I matched this in Xlights 2018.v42 and it just doesn't work.  I also made a terminator using a 100 ohm resister to pug into the other DMX port.  Again, nothing happens on XLIGHTS when I move the slides for the DMX device.  I made a NEW cable today thinking maybe I did something wrong or the network cable was bad... nope, didn't do anything.  I did put the falcon into test mode and the head would move up and down and only display red & green (even though it's an RGBW). 


I know this is NOT supposed to be this difficult, what the heck am I doing wrong.


I am having the exact same issue. Does anyone have an answer to this question? I thought maybe there was something wrong with my controller (Falcon) so I tried another one but it does exactly as described above.

algerdes

Most DMX based "theater" equipment have an indicator on them showing that data is being received.  (All 48 of mine do, and they are from different manufacturers.)
 
Is there any indicator on the first MH that shows it is seeing data?
Sequencers: Vixen3 and xLights
Players: FPP and xSchedule Controllers:  Renards - SS24/SS16; E1.31 - San Devices E682 - Falcon F16, F4, F48 - J1Sys - DIYLEDExpress E1.31 Bridges.  Much more!

Support FPP

+- Recent Topics

Christmas 2022 Lights by ShadowLight8
Today at 05:54:00 PM

FPP and projector by morrydavis
Today at 05:42:57 PM

Remote Relay Control by MGHaff007
Today at 05:42:01 PM

E1.31 data not getting to WLED controller by morrydavis
Today at 05:41:06 PM

Does FPP include an operating NTP server? by breese
Today at 05:11:29 PM

Wiring Diagram for the RJ45 port for DMX by dkulp
Today at 04:52:18 PM

GPIO by darylc
Today at 04:44:02 PM

FPP Settings dropdowns not populating by Poporacer
Today at 04:07:18 PM

USB Wifi Adapter by jem5136
Today at 02:15:45 PM

FPP 6.x Matrix Issues by cmndr brain
Today at 01:41:55 PM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod