Kulp OctoPlus v2.3

[Deltapeck]

On the back of my panels the sticker reads P5(2121)-3264-16S-M5. From what I can find online it looks like a 64x32 1/16 scan.
I am running

Version Info
FPP Version:	6.3-4-g5f0be713
Platform:	BeagleBone Black
FPP OS Build:	v2022-11
OS Version:	Debian GNU/Linux 11 (bullseye)
Hardware Serial Number:	2202SBB01575
Kernel Version:	5.10.109-fpp
System Boot Time:	2023-04-12 21:26:25
fppd Uptime:	00:08
Local Git Version:	5f0be71 ChangeLog
Remote Git Version:	5f0be71

You cannot view this attachment.
This is the output I get. If I check Output By Row I get the same result. If I check Blank between rows I get the same result.

[Deltapeck]

If I select 64x32 1/8 scan and go through all of the panel Interleave settings and Output By Row and Blank between row combinations I don't get anything better then the 64x32 1/16 Scan setting. I have tried different cables, different ports on card, different screens, and different versions of FPP. Any ideas?

[JonB256]

Do you have any Plug-ins installed? or any "Other" configurations that could be throwing off the pixel placement? The staggered placement of the pixels looks like something is displacing the count.

[JonB256]

I thought this site was to ask and answer configuration questions.

In the Zoom room, someone there can connect to your computer by sharing your screen to see your settings. Just reading about them can be like wearing blinders.

[Deltapeck]

Do you have any Plug-ins installed? or any "Other" configurations that could be throwing off the pixel placement? The staggered placement of the pixels looks like something is displacing the count.

No installed Plug-ins. No "Other" configurations. All this controller and cape do is run the 2 LED Panels. I have the 5v Power Supply running power to the screens and the Kulp cape with the BBB attached. I have a ethernet cable running from there to my show network. 

[MikeKrebs]

Did you resolve this? What was the end result?

[Deltapeck]

No resolution. I love the Kulp cards but it looks like I will have to go back to Colorlight card.