News:

LATEST RELEASE:  FPP 5.5 - Download from here - https://github.com/FalconChristmas/fpp/releases/tag/5.5

+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Site Stats

Members
Total Members: 15231
Latest: Manuelpereyra78
New This Month: 20
New This Week: 4
New Today: 2
Stats
Total Posts: 124533
Total Topics: 15147
Most Online Today: 58
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 4
Guests: 26
Total: 30

First Mega Tree

Started by breese, May 30, 2022, 02:26:52 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

breese

I am starting to build my first mega tree.
My Sasquatch tree is on order. I have the Nodes and Strips needed for it.
After reading a lot of threads and watching a lot of video's, I decided to take the advice a Lot of people have given and Save my hands from all the pain!   ;D
After a little thought I decided I would make use of what I have already.

1x1 wood board
1/2" whole bit
1 Old short 3/8 drive extension
1 Old 9/16 socket
a drill, table saw, a drill press, and small vice.

First I drilled a 3/4 deep hole in the 1x1 on my drill press, then with 3 passes on my table saw with a sharp crosscut blade I cut a space on either side of the hole for the pixel wires.

Next I cut the wrench end of the 3/8 extension, mounted it in drill press, and placed the 9/16 socket on it.

I put the wood in my small vice and place it on the drill press.

After setting the alignment and height, I can now use the drill press to press the strips onto the nodes with almost no effort.
This also allows me to be a little OCD and make sure all the wires are straight and even from node to node.....

Hole drilled and slot cut
You cannot see attachments on this board. You cannot see attachments on this board.

Inserting nodes into strips.
You cannot see attachments on this board.





breese

Made 2 small changes to the Pixel tool (plus a correction to the above post).
The socket is a 7/16 not a 9/16 and switched to a deep well socket.
Second thing was I wanted to have Eyelets on the top to help with the strain.

I took the other end of the cut off extension over to my grinder and gave it a ruff half moon shape.
Then I mounted the extension in my drill press and used a metal file (while the press was running) to clean it up and round it off.

Now I have a single tool to push the nodes into the strips and put the eyelets in.
If anyone has a mill, here is your chance to make a tool to do the same thing and possibly make a few bucks...  lol


You cannot see attachments on this board. You cannot see attachments on this board. You cannot see attachments on this board.


Support FPP

+- Recent Topics

FPP CANT REACH CONTROLLER THROUGH ETHERNET IP ADDRESS by k6ccc
Today at 12:33:42 PM

Testing RGB's by ecbrum
Today at 12:09:32 PM

Beagle Board x36 networking issues. by rayster
Today at 11:40:19 AM

Touchscreen by Poporacer
Today at 10:46:45 AM

BBB Display by TracyDockter
Today at 07:13:26 AM

Customizable Virtual Matrix to Drive Video Screens by CaptainMurdoch
August 18, 2022, 02:38:11 PM

Pi Top on sale by CaptainMurdoch
August 18, 2022, 11:49:33 AM

PiCap abnormal conditions: Disabling my IP address by CeP
August 18, 2022, 08:00:16 AM

FPP 6.0 Released! by Poporacer
August 17, 2022, 05:17:25 PM

Just putting this out for research? by Poporacer
August 17, 2022, 10:53:09 AM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod