News:

LATEST RELEASE:  FPP 6.1 - Download from here - https://github.com/FalconChristmas/fpp/releases/tag/6.1

+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Site Stats

Members
Total Members: 15492
Latest: Robnation13
New This Month: 5
New This Week: 28
New Today: 5
Stats
Total Posts: 127027
Total Topics: 15585
Most Online Today: 66
Most Online Ever: 7634
(January 21, 2020, 02:14:03 AM)
Users Online
Members: 2
Guests: 25
Total: 27

After Sequence all relays come on and stay on

Started by tmartindale, October 10, 2018, 08:08:23 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

tmartindale

After my Sequence is done playing all the relays come on and stay on. is there a way to stop this from happing? I'm a total newbie at this sorry if i put this in the wrong place, i'm just very frustrated. I have the fpp loaded on the raspberry pi v3 and it is connected to an arduino and that is connected to two relay boards.
and info would be greatly be appreciated.

Thank you.

JonB256

In FPP Settings, try a Check in the Always Transmit Channel Data box

That may be overkill but it will continue sending data out that could keep your Arduino happy.

Hobbyist relays frequently give two connection options; Fail Open (FO) or Fail Closed (FC). You are using FC so when it loses signal input or power, the contacts are closing. Try the other set?  Of course, that will invert all your sequencing.
Long time Falcon, FPP and xLights user

tmartindale

Thanks, I tried that but it still stays on. Do i have to make an inverted sequence, and then try this?
Thanks..

JonB256

I guess you may need to clarify what you mean by "relays come on and stay on"

The only Relay board I've played with is a 4-Relay USB board. It connects to a USB port but communicates as a 4 channel DMX board. (Outputs / Other / USB Relay)

If the FPP is running, even when no data is being sent, all the board lights (LEDs) are on and the Relays are held in their "ON" position.
Depending on how I wired the relay outputs, that is going to be "Open" or "Closed."  When the DMX value sent is 255 (I only send "0" or "255") the relay changes state.

http://www.icstation.com/icstation-micro-channel-relay-module-control-relay-module-icse012a-p-4012.html

Doesn't get much simpler than that. As far as your Arduino setup, I have no experience.
Long time Falcon, FPP and xLights user


JonB256

As long as that board has 5vdc applied to it (VCC and GND), the Relays are going to be energized. Its just the way it is built (pretty standard)
Someone probably makes one that works the other way, or you could modify the circuitry to add an "inverter" to the relay's input.

The inputs on IN1 thru IN4 actually turn "off" the relays.

If you're worried about the relays "burning up" if they stay energized, stop. They are rated for it.
Long time Falcon, FPP and xLights user

tmartindale


JonB256

#7
Quote from: tmartindale on October 12, 2018, 11:00:37 AM
Any suggestion on what I should do?

Personally - I'd buy the 8 Relay board from ICStation (see my link). Its about $14, is powered from your Pi's USB output and easily controlled as an 8 channel DMX device.

Now, this will still leave those relays energized as long as the Pi is powered up (since they get their power from the USB)
The 8 Relay board does have a provision for external power. That should reduce the current loading on the Pi.

https://drive.google.com/open?id=1Egpvf03sXxnV9p2K6ROBBjQXElopqIsk1g
Long time Falcon, FPP and xLights user

tmartindale

Could I make one of the GPIO pins to shut off the relays at the end of the sequence? Like in a playlist. I just need the relays to turn off at the end of the sequence because the fog machines are energized until I pull the plug or turn it off the pi.

JonB256

On the specific relay controlling the Fog Machine, you should "Move the Wire"

Each relay has 3 screw terminals. You have one on the center terminal and one either Right or Left of center.
Leave the center wire. Move the other. Now your Fog Machine will be OFF until you specifically turn it ON.
Long time Falcon, FPP and xLights user

Support FPP

+- Recent Topics

Unable to donate on PayPal by Mat-Moo
Today at 01:10:10 AM

Fpp 6.2 ui password by Mat-Moo
Today at 12:42:53 AM

Pi zero 2w by Sawdust
Today at 12:25:33 AM

I'm Stumped by saleencb
November 30, 2022, 11:49:40 PM

FPP not releasing control to WLED when idle by cwr89
November 30, 2022, 10:58:43 PM

BRP Voting Plugin - Allow others to vote for your songs! by plaberge
November 30, 2022, 09:27:58 PM

Very unexpected error message by tirebytrlights
November 30, 2022, 09:23:37 PM

Standalone Mode - limitations? by darylc
November 30, 2022, 09:21:04 PM

Controller not keeping accurate time by JonD
November 30, 2022, 05:21:55 PM

VAST-FMT/Si4713 plugin 4.1 by sgmaitland
November 30, 2022, 04:43:46 PM

Powered by EzPortal
Powered by SMFPacks Menu Editor Mod