Renard Output Delayed

[dgbcoleman]

Hi all,

For some reason my Renard universe is delayed from the audio while my LOR network running in DMX is perfectly on time. I am using a usb to rs485 converter to connect the Raspberry Pi running FPP to the Renard network. I have attached a photo of my channel outputs page. Any ideas?

[dgbcoleman]

I had left 8 channels on the last Renard controller unused so I tried patching those in Vixen and then re uploaded the sequences but that did not help. This delayed behavior on the Renard network also happens when I run a display testing chase in FPP. The renard controllers start at the same time as the LOR Controllers but then freeze for a second before continuing on but at a significant delay.

[dgbcoleman]

I plugged the adapter into my pc and ran a sequence off of Vixen to an extra controller, there was no delay.

[dgbcoleman]

Fixed it, apparently it doesn't like 10ms sequence timing, I switched it to 15 and everything worked as it should!

Sent from my SM-F721U using Tapatalk