F48 and LOR issue

[garhett]

Hoping for some Falcon help. Have an F48 that controls eves and yard outlines. On testing all works perfectly. On sequence I get the following:

one with 100 the first 50 work on sequence and the last 50 do not. This diff. receiver also feeds another 50 on a 2nd port that are fine.

On the 125 none work during sequence. On this diff. receiver another port of 50 works fine.
Slider is set to [color=rgb( var(--theme-link) )]533/268/223[/iurl].[/font][/size][/color]

I had port two (5-8) on the F48 go bad by user error so had to go to bank two for a few ports.
Bank 1 has 496 pixels on it
Bank 2 has 129
Bank 3 has 16

I put 1 pixel on the ports not in use.

Seems software/config related since on test mode all lights work. 

Another weird anomaly was universe 13 wouldn't work so I had to change the universe on that port to 18 and was good. Wonder if this is similar.

Any thoughts?

[garhett]

Pic of LOR S5 preview and F48. Universes 41 and 44 are the issue.

[garhett]

as normal this year, for me, looks like a user error. will test later :facepalm:

[garhett]

part me and part who knows. I moved to another port on the diff. receiver, moved the same universe and pixel count to the new port and now it works when running a sequence. i dont want to say the port is bad because it works in test mode.