Help with house.

[Petrey]

This is my first Christmas show project so I'm needing some help on how to wire up my gutters and eves. I'm thinking about spitting the house up in 3 sections left, middle, right. I've added a janky draw-up of how I'm wanting it. Controllers a kulp16 a-b. I've got the items for power injection. Any input will be appreciated. 

[MikeKrebs]

Looks like a good plan. Would be slightly more interesting if you did the verticals inside the window frame and don't forget the door!

[K-State Fan]

Looks good.  I do not use any power injection so my thought process will not help you there. I would try to plan for the future though. That gable end over the porch would be a good place for a high density prop.

[Petrey]

With my 3d printer (everyone should have one of them) I've printed off 2 singing bulbs, 5 snowflakes, and plan on some candy canes. I've made some leaping arches and plan to do a mega tree. Now in xlights, it doesn't matter if one strands vertical and then gets tied a prop and then gets tied into a horizontal run. That can all be programmed that way right. Hate to start doing something and it be completely wrong. 😑 

[Petrey]

Snowflake