F16V5 DMX

[ok aj]

Hi all, I'm new to DMX and actual pixel boards as a whole. In the past I used four different RaspberryPi's to power my show but this year I bought an F16V5 so I could better manage everything and use the Pi's for other projects.
Anyway, I wanted to connect a fog machine so I got the same model as was used here: 

And I connected it the same way as best I could however it does not seem to work.
Does anyone have any thoughts about what the problem could be or how I could fix it?
Yes I have the breaker things pointed to DMX, I hopefully have my channels configured correctly. In the F16V5 webui -> Output Settings -> Serial Ports, it's set to DMX and the start channel is indeed 1.
You cannot view this attachment.
You cannot view this attachment.
Is my setup in XLights and the sequence is below.
You cannot view this attachment.