Help

[joeally06]

It's almost 11:00 pm here and I am feeling so down right now. I waited for a week to get my board in, but I can not get and light to light up even though I am seeing data on the monitoring coming from xlights or running the test in FPP. I have removed the pigtail and hook right into the board, tried a set of pixels I know is working. Nothing no light will light up. What could I be doing wrong? It's just a simple test of 50 lights. Thanks for the help.

[anthonyfain]

Start by checking the following:

Controller:
1. Check to see if the Port Configuration is setup properly
2. Check to see if your E131 string setup is also done properly.

That's what I'd start with. If those are set up properly, you should be able to run the test mode with your lights and see some output to the lights.