Can’t see F16V3 through FPP

[Laser Falcon]

Well I'm back with the same question I had four years ago only with a new computer and an updated FPPv6.3.  Despite incorporating everything I thought I knew and reviewing dozens of videos and other posts, I am out of things to try in order to be able to access my controllers from my computer.  I can reach the FPP but I can't get to the controller.  Attached are screen shots of my FPP network setup (ETH0 and WLAN0), F16V3 network setup, Mac Terminal commands, and my Router static route list.
 
If anybody can bail me out again I would very appreciative because I am at my wits end yet again.

[tbone321]

Your attachments did not come thru.

[Laser Falcon]

Not sure why attachments didn't come through. I watched each of them upload.  Here they are again.

[JonD]

The forum file upload has been broke for several days.  Don't think anyone can upload files.  Forum server possibly out of disk space?

[Laser Falcon]

The attachments still aren't showing up.  Any body know what I need to do different? I upload each attachment, watch the green bar go clear across the screen, have five green bars showing and then I hit the POST button.

[Laser Falcon]

OK.  I finally solved the problem after going through this video yet again:
https://auschristmaslighting.com/threads/networking-falcon-controller-to-pi-home-network.14042/

The problem was the very last step because I had the incorrect gateway on the F16V3.  What I don't understand is that I was using my system this summer and it worked fine.  I say it worked fine but there was one big difference. Instead of connecting to my FPP wirelessly I was connected via ethernet because of the venue I was in.  That must have had something to do with it but I am too tired to try and think through it right now.